When trying to install shelving in glass cabinets in Melbourne, it is important that you be highly careful, otherwise you could find yourself with a shattered shelf or even a shattered cabinet. To ensure that you don’t cause any damage or injuries during the installation of your shelving, follow these directions:
Step 2: If you need to replace the supports, make sure that you measure the width of the glass cabinet to determine what size you’ll need. If needed, drill new holes. If not, you can replace the old supports into the pre-drilled holes.
Step 3: Place the shelf on top of the supports and check that it sits evenly by placing a level onto it. If the bubble is in the middle, you are set to go. If not, you will need to adjust the supports until it’s all level.
Make sure that the supports you choose for your glass cabinets in Melbourne are the right size for your shelving, otherwise they may fall off. This could break the shelf (if it is glass) or the front of the cabinet. You could also use brackets if you want to ensure that the shelf is properly supported.